How Diamonds Are Mined

We seldom think about how the diamonds we wear came to us. Natural diamonds, as opposed to synthetic diamonds or fake diamonds, are mined from the earth. There are currently two methods of mining diamonds: Pipe Mining and Alluvial Mining.

When pipe mining is used, the diamonds are extracted from the earth through volcanic pipes. These are not man-made pipes. These are natural pipes in the ground. Shanks are put into the ground next to the pipes, and tunnels are driven into the deepest parts of the pipe. The diamonds are not sorted out at the mine. Instead, huge rocks that are full of diamonds are brought out of the mine and moved to a screening plant for separation.

The Alluvial mining method is done in riverbeds and on beaches. Walls are built to hold back the water and the sand on the bank or beach is moved with a bulldozer until the level of earth that diamonds can be found in is reached. Again, the diamonds are not sorted here. Instead, the sand that contains the diamonds is bulldozed into trucks, and taken to screening plants.

Bonded Diamonds

Before you start shopping for diamonds, consider dealing with a bonded jeweler. Bonded jewelers sell bonded diamonds, and there are very few bonded jewelers in the world. In fact, out of all of the jeweler's in the world, only about 5% of them are bonded. Buying a bonded diamond will cost more than buying a non-bonded diamond, but when you look at what you get with the bonded option, you will see that it is well worth the extra expense.

First, bonded diamonds have a buy back policy for the life of the diamond. No matter how long you have had the diamond, you can take it back to the bonded jeweler and sell it back to him or her, for a 100% refund. If a jeweler does not offer a 100% buy back guarantee, for the life of the diamond, then you should take a closer look at the diamond to see what is wrong with it.

Bonded diamonds also have a breakage policy. If the stone breaks or chips, the bonded jeweler will replace it with a new one - one time. No jeweler would ever offer such a policy on any stone that was not 100% natural, so just the offer of such a policy should give you piece of mind concerning the quality of the diamond. Bonded diamonds are natural and untreated.

Bonded diamonds increase in value, with a fixed appreciation rate that is designed to keep up with inflation. This means that a diamond that is worth a certain amount of money today will be worth more in the future, as the price of diamonds continues to rise. This generally does not apply to buy backs, however. It typically applies to trade-ins.

Alternately, by purchasing a bonded diamond, you are protected against the possibility of a market crash. If a market crash occurs, the value of diamonds will drop. However, the bonded jeweler guarantees to refund you the difference between what the diamond is now worth and what you paid for it before the market crash.

It may be difficult to find a bonded jeweler in your area, but if you can, this is who you want to deal with, as opposed to dealing with an un-bonded jeweler. Specifically tell the jeweler that you are only interested in bonded diamonds. You can find a bonded jeweler in your area by using various online resources, or by calling the local jewelry stores.

Where Diamonds are Mined

Argye mine located in the Kimberley region in the far north east of Western Australia. Owned by Rio Tinto, this mine is the world's largest single producer of volume of diamonds. However, due to low proportion of gem quality diamonds it is not the value leader. It does produce 90-95% of the world's supply of pink diamonds.

Diavik is also owned by Rio Tinto, located in Canada it is a very large mine. It is located north of Yellowknife and south of the Artic Circle on an island. The island is connected by an ice road. It is also an important part of the regions economy employing more than 700 people and producing more than 8 million carats annually.

Ekati diamond mine is owned by BHP Billiton and located south of the artic circle in the Northwest Territories of Canada. The Ekati is Canada's first operational diamond mine. Diamonds mined here are sold under the Aurias trade name Authenticity is verified through Canada Mark service. CanadaMark service is also owned by BHP Billiton Diamonds, Inc.

Baken diamond mine is located along the lower Orange River in South Africa. It is owned and operated by Trans Hex. The average size stone for 2004 was 1.29 carats. In 2004, this mine produced a 78.9 carat D color flawless diamond that sold for more than 1.8 million dollars (US), as well as a 27.67 pink diamond that was sold for over 1 million US dollars.

Merlin is the second of only two diamond mines in Australia. No longer operating it was owned by Rio Tinto and sold to Striker Resources, who has explored the possibilities of reopening the mine.

Orapa is the world's largest diamond mine. It us located 240 Km west of Francistown. The mine is owned by "Debswana" which is a partnership between DeBeers and the government of Botswana. This mine operates 7 days a week. It maintains pre primary and primary schools for its employee's children. There is also a 100 bed hospital and game park. This mine began production in 1971 and is the oldest mine owned by the Debswana Company.

The Premier mine located in Cullinan, South Africa produced the largest gem diamond
ever in 1905. The Cullinan Diamond weighed 3,106.75 carats. This mine also produced the Golden Jubilee diamond which weighed 545.67 carats. This mine is owned by the De Beers Company and was renamed The Cullinan Diamond Mine in 2003 in celebration of its centennial.

Insuring Your Diamonds

Insuring a diamond takes a bit of thought, planning, and shopping around. Diamond insurance isn't like purchasing car insurance. It is quite different. Depending on the state that you live in, there are basically three different types of policies that will cover diamonds, and all insurance policies that cover diamonds are considered Marine type policies.

The first type of insurance policies for diamonds is an Actual Cash Value policy. If the diamond is lost or damaged beyond repair, the insurance company will replace the diamond at today's market value, no matter how much you paid for the diamond to begin with. This type of insurance policy for diamonds actually is not that common.

The most common type of insurance for diamonds is Replacement Value insurance. The insurance company will only pay up to a fixed amount to replace the diamond that was lost or damaged beyond repair. This does not mean that they will pay that amount - it means that they will pay up to that amount. In most cases, the diamond can be replaced at a lower cost.

The third type of coverage offered for diamonds is Agreed Value. This is sometimes called "Valued At." This type of coverage is very rare. In the event that the diamond is lost or damaged beyond repair, the insurance company simply pays you the amount that you and the company agreed upon. This is the best type of insurance to have, but it is rarely offered. If you can't get Agreed Value coverage, Actual Cash Value coverage should be your next choice.

Your rates will be determined by the value of the diamond, the type of coverage that you select, and the area that you live in. If you live in an area with a high crime rate, you can expect to pay more for your diamond insurance coverage. It is important to remember that insurance agents are not qualified jewelers, and jewelers are not qualified insurance agents. It is best to get a certificate for your diamond, and to provide the insurance company with a copy of that certificate. This leaves the insurance company less room for arguments over the actual value of the diamond.

Don't rely on separate coverage to cover your diamond. For instance, if you diamond is stolen from your home, it is probably covered on your home owner's insurance policy - but the diamond probably won't always be in your home, and once it leaves your home, there is no coverage.

How Diamonds Are Cut

In their most natural form, diamonds are - well - quite ugly. They have no luster or shine, and in fact, look like nothing more than broken glass. A diamond must be cut, and then polished before it actually becomes a thing of beauty.

Diamonds are cut with saws, into round shapes. From the rounded shape, other shapes may be cut, such as heart shapes - but the shape is less important than the quality of the cutting that is being done. If the diamond is poorly cut, it will lose light, and it will not sparkle and shine very well. Each facet of the diamond must be carefully cut into the geometrical shapes that allow the diamond to sparkle and shine, then the entire diamond is cut into a specific shape, such as an emerald cut or a princess cut diamond.

Once the cut is done, the diamond is put into a dop, which resembles a cup with another diamond - only a diamond is strong enough to smooth the edges of another diamond. Once the diamond has been cut and shaped, and had the edges smoothed in the dop, it is polished on a scaif or a diamond polishing wheel.

Are Diamonds Really Rare?

When you walk into a jewelry store and see all the diamonds in all of the various settings that are for sale, it is difficult to realize that diamonds are indeed rare. Most people don�t even stop to consider how that diamond came to be sitting in that jeweler�s case! There is quite a bit of work that is done before a diamond is ready to sell to the general public!

For every one million diamonds that are mined, only one will be found that is a quality one caret diamond. In order to find a two caret diamond, about five million diamonds must be mined. More than two hundred tons of ore must be mined to find one small diamond, and even then, more than 80% of the diamonds that are mined are only
good for industrial use, such as diamond drill bits.

So, the next time you visit your local jewelry store, ask to see the one carat diamonds. You should look at this diamond with new appreciation � knowing that it truly is one in a million!